PT-059 Underwater Case

PT-059 Underwater Case

PT-059 Underwater Case

This underwater housing made exclusively for the TG-6 can withstand pressure to a water depth of 45 m. Even when stored in the housing, the camera control dial can be used for exposure compensation. The front surface is black to prevent any unwanted reflections. The housing supports the use of two external flash units. PTWC-01* Underwater Wide Converter and PTMC-01* Underwater Macro Converter can be used with this case.

  • The separately available PSUR-03 Step-up Ring is required to attach converters.

Specifications

Underwater pressure resistance 45 m
Compatible model TG-6
Size (excluding accessories) 157 mm (W) x 122 mm (H) x 81 mm (T)
Weight 484 g
Supported accessories System chart
Box contents PFCA-03 Optical cable adapter, POL-058 O-Ring, PFUD-08 LCD Hood, PRLC-14 Body Cap, PSOLG-2 Silicone Grease, SILCA-5S Silica gel, POSR-053 Optical fiber cable insertion slot cap, O-ring Remover, Hand strap
  • Specifications are subject to change without notice.
  • The Field Sensor System will not operate properly when the camera is installed in the underwater housing. Make sure to set the log lever to the off position when using the case.
  • Use together with silica gel for best results.

Share

Find Us On

  • Facebook
  • Twitter
  • Youtube

Olympus Facebook